Five Ways To Install Door Closers

2022-09-09 15:27:11 admin 60

The correct installation method can maximize the role of the door closer, but also reduce many unnecessary trouble, it is necessary to choose the right door closer and the exact installation method.


1, STANDARD INSTALLATION.

The body of the door closer is installed on the side of the sliding door, and the support arm is installed on the door frame. This installation method is suitable for narrow door frame, there is not enough space to install the door closer. This installation also applies to the direction of the door open without obstacles door open to a large enough angle, the door closer will not hit the foreign object.

 Subtitle Suzhou GEKRONE Door Control., Ltd

2, THE UPPER DOOR FRAME INSTALLATION.

Door closer is installed on the push door side, the support arm is installed on the door. This type of installation is suitable for the door frame is wide, there is enough space to install the door closer. Compared with the standard installation, this installation is suitable for opening the door in the direction of the wall and other obstacles. Compared with the standard installation, this installation method of closing force is larger, suitable for larger and heavier doors.

Subtitle Suzhou GEKRONE Door Control., Ltd

3, PARALLEL INSTALLATION.

Door closer is installed on the side of the push door, parallel plate is installed on the door frame. This installation is suitable for door frame is very narrow, or almost no door frame you according to this way after installation, because there is no protruding connecting rod and rocker, so more beautiful. Compared with the standard installation, this installation is suitable for opening the door in the direction of the wall and other obstacles. Compared with the standard installation, the closing force of this installation is smaller.

 1

4, CONCEALED INSTALLATION.

This installation method applies to hidden door closers, installation methods and slide rail installation the same. Comparison with the first three installation methods, this installation method's closing force is the smallest. According to this way of installation, the door is in the closed state without exposed parts, so the most beautiful. This installation method is the most complex, the best need for professionals to install. This installation requires a large gap with the door frame, generally 10MM (or the installation of the upper part of the door to remove the material to increase the gap). The thickness of the door needs to be more than 42MM.

1

5, SLIDE RAIL INSTALLATION.

General door closer installed in the door, slide rail installed in the door frame. Door closers can be on both sides of the door. Comparison with the first three installation methods, this installation method to close the door force is minimal. In accordance with this way after installation, because there is no protruding linkage and rocker, so more beautiful.

Subtitle Suzhou GEKRONE Door Control., Ltd


Tel
Mail
Map
Customer Service