How to Replace the Floor Spring
In today's life, the application of glass doors more and more common, glass doors compared to wooden doors metal doors more beautiful, visually also has the role of increasing space, and the installation of glass doors undoubtedly need to use the ground spring, the ground spring can be very good to ensure the safety of everyone's glass doors. So when the floor spring breaks down after a long time, how should it be replaced? How do maintain the floor springs in order to increase their service life? The following is a detailed description.
How to replace the floor spring
1、The first thing to do is to remove the color steel sandwich panel on the glass door with a screwdriver, and then lift the glass door. Use a screwdriver to remove the four small screws on the floor spring, and then remove the floor spring. Then write down the error value of the ground spring of the glass door, and make a good specification of the cross-line mark at the part of the ground spring that needs to be replaced with a new one.
2、Then chisel out the damaged floor spring and the surrounding groove pit and remove the remaining ash immediately after the wet rag scrubbing neat. Then use a soft brush of banana water to brush around the groove pit to make it moist after brushing a smear mortar or waterproof putty.
3、The new floor spring is placed in accordance with the marked cross line parts in time, surrounded by small wooden wedges fixed in many ways, high and short parts with different specifications of the steelhead pad.
4、According to the ratio of 1:15 mixed cement and coarse sand, made of "dry forced mixed mortar", dry level to force pinch can feel wet and cold as a standard, too wet does not have the role of timely fixed immobile ground spring, and then to add to the level of filling the groove pit, with the filling with the hammerhead and steel burin knocking denseness, the entire operation process needs to be checked by level The part of the ground spring is not accurate, and if there is a moving condition, it can be adjusted at any time and anywhere.
5、To be filled to about the same level as the ground, hammerhead hammering flat and then slightly smoothed with an iron scraper can be. If there is a ground tile overall surface layer, to pour a layer of thinner cement mortar on the brown overall surface layer, you can set the ground tile overall surface layer.
6、Before the completion of the check before and after the left and right, up and down, height error, etc. are no errors, in the above cover a layer of plastic film for storage of water does not flow out.
7、If you want to install a new floor spring, the way is the same. If you can't do it yourself, you should ask a professional to install it.
Maintenance of floor springs
Here are some tips for the maintenance of floor springs:
1、Do not soak the floor spring.
2、The speed of closing and locking the door should not be too fast, and the variable speed knob should be adjusted appropriately, and if there is no reflection, please check whether the floor spring is leaking oil.
3、In the process of use, the floor springs do not need to apply external force to them in the whole process of closing the door, otherwise, it is likely to cause the destruction of internal components.
4、The speed and precise positioning of the door will change after using it for a long time, so adjust it again.
The above is how to replace the floor spring and how to maintain the floor spring-related expertise is introduced in detail. According to the above, it is important to maintain the floor springs in the whole process of applying them in the future, and it is important to maintain them well to increase their use time.
If you want to know more about floor springs, we will be glad to provide you with more services. GEKRONE always provides high-quality products, good quality can reduce many unnecessary troubles for you, of course, you can contact us at any time if you have any questions after purchasing our products. Wish you a happy life~